Jaton VIDEO-PX498-TWIN Manuel d'utilisateur télécharger pdf (Page 19)

Hardware Installation

Installation Procedures

!! WARNING!!

Discharge static electricity by

touching the GROUND such

as metal part of your case

connected with good power

ground before you handle the

electronic circuit boards.

The manufacturer assumes no liability for any damage, caused directly

or indirectly, by improper installation of any components by unauthorized

service personnel. If you do not feel comfortable performing the

installation, consult with a qualified computer technician

Steps:

1. Turn OFF all powers to your system, including any peripherals (printer,

external drives, modem, etc.).

2. Disconnect the power cord and the monitor cable from the back of the

computer.

3. Unfasten the cover mounting screws on your system and remove the

system cover. Refer to your system user manual for instructions to

determine the location of the mounting screws.

4. Remove the retaining screw that holds the slot cover in place. Slide

the slot cover out and put the screw aside (you will need it to secure

the adapter).

5. To install the adapter in PCI-E expansion slot, carefully line up the

gold-fingered edge connector on the adapter directly above the

expansion slot connector on the motherboard. Then press the adapter

into place, completely. Use the (remaining) screw you removed to

secure the adapter-retaining bracket in place.

6. Replace the computer cover. Secure the cover with the mounting

screws you removed in Step 3.

You have now completed the installation of your new graphics adapter on your

system.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 35 36

Pas de commentaire

Jaton VIDEO-PX498-TWIN Manuel d'utilisateur Page 19